Any interest in selling off some of the ski gear separate? I could be interested in a portion or all of it.
Talk to skidim, but the short answer is, you probably won't find a replacement. You're likely looking at retrofitting to a carb/distributor if...
For sure a good reference point, and how I calibrate my speedos. I'll have to check out the speedbox app as the random one I grabbed is pretty...
While the phone app will work without cell service, I just prefer not to as my phone's a pos and turning the GPS on kills my battery in short...
If you're going to drop in a GPS speedo, and are doing watersports, I'd grab the one Perfect Pass makes, as it has a faster refresh rate than most...
They don't often fail out. Depending on what your symptoms are, you may fix your problem by just systematically going through all your electrical...
If that masterraft logo has been on there with any decent amount of time/sun exposure, you're going to get some ghosting in that black gel from it...
These http://www.skidim.com/SPARK-PLUG-KIT-FORD-351-HO-Autolite-764/productinfo/RP030007/ If you still have the Protec ignition with TBI, looks...
Yes, they're wood, but the engine is mounted on an aluminum box that's tied into the stringers. Floor is also wood as far as I can tell. I have...
While 95 was the first year for the GT-40, it is still a very reliable EFI system. It's also a relatively simple one too, so troubleshooting it...
If it's truly a 95 (straight horizontal stripes in the gel lines), the dyne should have the GT-40, which is arguably one of the best marine...
When working on your fin, you'll likely have better luck eliminating noise/singing if you leave the trailing edge squared off rather than filing...
The couch is a completely separate piece (not attached to the boat in any way), so you could literally build whatever you want back there. If I...
I don't recall if I've ever skied a boom on an outboard dyne (so don't recall what kind of side-spray they throw if any), but generally speaking,...
They're a good footing boat as a single rig. The table is flat and harder than most inboards will be. The wake is a hair steeper than some of...
These guys could make you a custom platform http://www.teakmarinewoodwork.com/swim_dive_platforms.htm
Something like this http://www.boatdepot.com/p-118/todd-swingback-boat-seat-with-aluminum would let you have a more standard observer's bench,...
Disappointing to see most of you guys' experience with wake-boarders has been negative. Around here, I see just as much if not more dock buzzing,...
Peter - I took a peek under my dash quick last night, and the only thing that might include that board is the attached picture (which I believe is...
Most tower installs on older boats need reinforcement under the deck to safely support a tower. Typically that consists of wood or composite...
Separate names with a comma.